COLLIN Lab & Pilot Solutions GmbH

Booth number 22C20

www.collin-solutions.com

About us

COLLIN Lab & Pilot Solutions develops and manufactures intelligent pilot & laboratory lines in modular system for plastic processing companies as well as for research institutes. The solutions improve the development as well as the production of plastic products, material analysis, test series up to pilot tests which allow a scale up to production scale. Collin develops individual solutions – platen presses, roll mills, calenders, extruders, compounders, extrusion lines, filter pressure tests or inspection systems.

Products and services

Presses S, SV

Press Type S particularly convinces with its quiet hydraulic aggregate, which does not run constantly. Moreover, no oil cooler is needed, resulting in a lower consumption of cooling water. Another advantage is the vertically moveable, ergonomic door. Optically, the Press Type S impresses with its futuristic, re-duced design.

Further reading

Flat film lines with three rolls

These versions combine finishing calender and the chill roll and are used for the production of thin-walled or dou-ble-wall films. The 3-roll unit can be used for vertical or horizontal operation. The forces in the polishing gap can be created in a hydraulic or pneumatic way. The polishing roll is suitable for a wide range of applications such as smoothing, embossing or laminating.

Compounders

The Collin compounders are suitable for the continuous melting, mixing, ho-mogenising, alloying and extruding of plastic materials.
All Collin compounders are available for co-rotating and counter-rotating ope-ration. The table-top compounder consists of a process part with a drive, set up on the electrical switch cabinet.

Address
COLLIN Lab & Pilot Solutions GmbH
Gewerbestr. 11
83558 Maitenbeth
Germany

Phone: +49 8076 2740-0
Internet: www.collin-solutions.com
E-mail: Send message

News & Innovations

COLLIN:New product brand COMELT as of 2020

Under the product brand COMELT – Collin Die Solutions, the company will offer extrusion dies with accessories in a wider range. Because, for the expansion of its portfolio and in-house production depth, Collin invests in new production lines. Therefore, as of next year, the company will concentrate the complete die production in one place. „There, we pool the know-how and the experience of Collin in design and manufacture. For that, the design process is supported by latest 3D-CAD- and CFD-software.“


Further reading
COLLIN: All-round quality measurement system multi-inspection generation 2

The Collin team has also realized many new functions and improvements for the multi-inspection - the all-round measurement system for film quality – optical, mechanical and rheological – 2. generation.

„For the multi-inspection, we have improved the ergonomics, since the measuring systems are now horizontally arranged. For that, a very compact combi-die and melt pump for rheological measurements are integrated. The new camera unit with improved LED technology guarantees higher control quality. The camera is controlled via a separate micro-controller. The evaluation of the data is made via an image processing system, which is also new. With this, we are in the high-end area of film quality control“, says DI Dr. Friedrich Kastner, CEO & Managing Partner Collin Lab & Pilot Solutions. Completely new is also our integrated FTIR based expert system, which displays the composition of samples also for operators without any spectroscopy knowledge.


Further reading
COLLIN Teach Line series generation 2 – innovative safety & digital features

During the last months, the Collin team has systematically been further developing the Teach Line product line. The series of compact table-top machines includes for example compounders, extruders, blown and flat film lines but also roll mills or pelletizers. These machines are used for apprenticeship, R & D but also for the production of special films.

The generation 2 presents itself in a new ergonomic design including the completely digital operation, control and 7” touch display CMI 7. The series is equipped with the latest safety features. SPS controlled and fully FECON capable, all parameters are controlled and evaluated online. As option, the table-top machines can be operated with 480V and 60 Hz.


Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact
OK

We use cookies and the web analysis tool Matomo in order to optimally design and continuously improve our website for you. By continuing to use our website, you agree to this. Further information and an objection possibility can be found here: Data protection